Connect the Oracle to the Revolution head with a standard cat 5 cable.

Connect the power to the Oracle

Select “1:Head” unit by moving the joystick up or down, or by hitting the red 1 button

Press enter to select

Use the joystick to move the Revolution head to your desired start position.

The Oracle has 3 memory banks indicated by the 1, 2 and 3 buttons.

Press and hold a numbered button for 5 seconds to clear that memory bank

Screen will say “erasing” and after a few moments it will display “move joystick to start record”. Make a mental note of where the head is positioned.

Move the joystick left and right, and/or up and down to begin recording your camera movement

Max speed, damping, and deadband, can all be adjusted during this time and will be recorded as will the timing

All movement is recorded in real time and a seconds counter is displayed on the screen

Press the same memory bank button again to stop the recording

To play back your recorded movement click the button for the memory bank you recorded it under

The screen will prompt you to return the Revolution head to the start position. (See step 8)

Use the joystick to move the head to your start position

Press your memory bank button again to start playback